The T210 is perfect for accuracy soldering jobs with medium power requirements. For its size, it is able to work with conventional or small SMD, even under a microscope. Its ergonomy and the short distance tip-to-grip ensure greater accuracy and comfort. The cartridges can be easily replaced using the quick cartridge extractor of JBC´s stands.

With a soft foam grip which provides thermal insulation. Is perfect for both SMD components and for jobs with high power requirements (e.g. ground plane soldering).

Its ergonomic handle and the short distance tip-to-grip ensure greater results and comfort.

The cartridges can be easily replaced using the quick cartridge extractor of JBC´s stands.

The T470 series are the perfect tools for intensive soldering applications requiring high power delivery such as power electronics, large coax cable soldering, metal sheet soldering, etc.

The T470 series deliver up to 250W when used with HDE Heavy Duty stations and C470 cartridge range.

Available with grips of different shapes and materials, as well as several cable lengths, the T470 series feature a set screw to secure the cartridge within the handpiece preventing its rotation.

They provides a perfect solution for fast and precise SMD rework of chip components and small/medium SOP from PCB assemblies.

The JBC Thermal Tweezers are designed for soldering and desoldering SMD components easily, reducing handling time.

HT works with two cartridges managed individually by the control unit to ensure the maximum accuracy and a quick temperature recovery. Each one can provide up to 80W if it is required.

Ergonomics ensure greater accuracy and comfort at work.

HT enables to align the cartridges according to the needs in order to adapt them to the component.

It works with C420 range of cartridges which includes different shapes and sizes for chip components applications such as QFP, PLCC, SOIC, etc. It is also available a cable stripper.

The Heavy Duty Thermal Tweezers were originally designed for soldering coaxial cables for telecommunications, reducing handling time.

They are the ideal solution for high thermal demands, such as copper conductors and pretinned aluminium parts, or prolonged
soldering jobs as they work with two HDE Heavy Duty stations.

The cartridges are managed individually thereby optimizing their thermal performance and can also be readily aligned to fit the component.

These tweezers only work with C470 cartridges.

The Heavy Duty Thermal Tweezers were originally designed for soldering coaxial cables for telecommunications, reducing handling time.

They are the ideal solution for high thermal demands, such as copper conductors and pretinned aluminium parts, or prolonged
soldering jobs as they work with two HDE Heavy Duty stations.

The cartridges are managed individually thereby optimizing their thermal performance and can also be readily aligned to fit the component.

These tweezers only work with C470 cartridges.

DR is an iron for desoldering jobs of through-hole components and removing excess solder after SMD rework. It is capable of providing up to 160W.

The exclusive JBC heating system and the suction power from MSE or MVE pumps ensure the optimum quality.

When the solder container is made of glass you can see when it needs cleaning and the filters need replacing.

DR uses C560 cartridges with internal diameters of 0.6 - 3 mm. Some tips are specially designed for cleaning traces of tin from PADs.

The desoldering iron comes with the C560003 tip.

Also supplied with C560013, C560004, C560005 and accessories.

The AL250 is the most appropriate tool for extensive soldering applications that require one free hand.

The AL250 supplies the tin wire automatically provided by the AL Auto-Feed station.

This comfortable tool incorporates an anti-rotation screw to best align the cartridge.

The AL250 works with C250 cartridges.

Supplied with the C250403 cartridge and the 0002401 guide tube.

This ergonomic Solder Feed Handle allows you to feed solder wire automatically from any position.

It works with the SF Automatic Solder Feeder and is compatible with solder diameters from
Ø 0.5 up to 1.5 mm (see guide sets, sold separately).

You can press the button to feed the solder wire or use the P-005 pedal connected to the SF.

You can change the guide tube for each application.

The TE-TB works with TESE Precision Hot Air stations (100V/120V/230V), including the TESE-Q models for the same voltages.

It allows you to repair all types of SMD electronic components quickly and safely, even the biggest QFPs and PLCCs.

You can use TE nozzles to direct the heat to a particular area and protect adjacent components.