Multistage Ultrasonic Cleaning System
MultiClean cleaning systems are available with 2, 3, 4 or 5 tanks from our standard range as well as larger quantities for special machines at request. Tanks can included multiple configurations including pre-washing, ultrasonic cleaning, rinsing, passivation and drying.
Prewashing is generally used for very dirty or greasy parts before precise cleaning to remove rough contamination to save time, water, and cleaning chemical consumption.
Ultrasonic cleaning power is able to reach points that are normally very difficult like small holes and complicated shaped parts that can't be cleaned with a brush or by hand giving better precision cleaning results.
Cleaning Chemical residue can remain on the surface of the parts after cleaning. To wash away these chemical residuals rinsing can be used either by a closed circulation system or by continual fresh water supply.
Sometimes cleaned parts need to be protected against oxidation and by adding an additional stage with a passivation chemical inside the tank you can passivate and protect inside the tank.
After the cleaning process is complete, parts can be dried by either hot air or vacuum drying as the final stage, according to the geometry of the parts and to customers requirements.
To learn more about the MultiClean and its highlights, simply download our datasheet below.
Contact our Cleaning Specialist
Our sales and technical team are on hand to support any questions you may have.