SelectiveRIDER

The SelectiveRIDER™ is a measurement pallet designed to capture parameters from the selective solder process and collect machine data for repeatability. It uses the SuperM.O.L.E.® Gold 2 profiler as the data collection device, and a dedicated environment in MAP software for analysis and SPC. It captures: fountain height, fountain X/Y accuracy, fountain diameter, solder temperature, maximum preheat, Delta T at contact, Flux penetration, and Fluxer X/Y accuracy.

• Measurement Parameters include:
  • Max Pre-heat / Delta T
  • Fountain Temperature
  • Fountain X/Y Position / Diameter
  • Fountain Height
  • Dwell Time
  • Flux Deposition / Uniformity
• Dynamic X/Y Sensor
  • Measures both X and Y position from target center in addition to fountain diameter while touching the bottom of the pallet.
• Height Sensor
  • Measures fountain height as referenced from the bottom of the pallet.
• Mini Fluxometer®
  • Included with the kit are two test mesh types; V-Gauge (Vernier) and UP (Uniformity & Penetration) along with three types of test paper.
• Thermal Barrier
  • Easy docking and automatic configuration through built-in barrier technology.
• Rider LED
  • The Rider LED indicates when SuperM.O.L.E.® Gold 2 is properly connected to the SelectiveRIDER™ test pallet which automatically sets the M.O.L.E.®’s configuration.