The Despatch PCO2-14â„¢ electrically heated oven was designed to meet the specific process requirements for hard baking polyimide coatings in an inert atmosphere. This high-performance, clean process oven (ISO Class 5/Class 100 recirculated airflow) offers many unique components, including a pressure relief system, an oxygen control system and a process monitoring system which allows the oven to achieve the strict oxygen level and atmospheric requirements involved in polyimide curing.
|
|
Search Systems
ITW EAE Despatch | Polyimide Curing Oven
PCO2-14
With horizontal airflow for ultimate temperature uniformity.
Is this system right for you?
Let our expert team guide you in choosing the perfect system for your needs.
Description
A clean process oven designed for polyimide baking and curing applications
The Despatch PCO2-14â„¢ electrically heated oven was designed to meet the specific process requirements for hard baking polyimide coatings in an inert atmosphere. This high-performance, clean process oven (ISO Class 5/Class 100 recirculated airflow) offers many unique components, including a pressure relief system, an oxygen control system and a process monitoring system which allows the oven to achieve the strict oxygen level and atmospheric requirements involved in polyimide curing.
Pressure Relief System
In the “hard bake” polyimide cure process, residual solvent is removed and desired surface properties are. finalized. The process of removing solvents requires that the oven contain equipment to help prevent and collect solvent condensation. Despatch designed the PCO2-14â„¢ with a pressure relief system that includes a removable “cold trap”, an easy-to-clean condensate trap that helps to prevent polyimide buildup in the oven’s exhaust.
Oxygen Monitor and Control System
|The PCO2-14â„¢ is an inert atmosphere oven which allows the oxygen level to be maintained at 20ppm or less to help prevent oxidation of the polyimides being cured. The oven contains an O2 monitor which is wired to the purge valve and turns the nitrogen purge on whenever the oxygen level is above the O2 monitor set point. Once the nitrogen purge is complete, the O2 level is maintained at a set point by a controller that operates a modulating valve during the curing process. This process minimizes the nitrogen usage and allows for consistent and repeatable product curing.
Process Monitoring System
The oven’s PC features Protocol 3â„¢ software to allow for communication between the PC and the oven, an Ethernet connection and a 15in (38.1cm) . flat panel display screen. . The Protocol 3â„¢ software communicates directly with the oven’s Protocol 3â„¢ controller, O2 controller, O2 monitor and integrated PC to observe and data log entire cycles and provide the user with realtime information on set points, actual chamber temperatures and O2 levels throughout the entire process.
Your reliable partner for thermal processing.
Features
- Compact cabinet design that minimizes footprint
- All interior seams continuously welded on insulation side to protect the work chamber from contamination 4in (10.2cm) thick insulation in chamber to minimize heat loss, air leakage and external thermal spots
- Recirculation air is 100% filtered through a 99.99% HEPA filter for ISO Class 5 (Class 100) or better operation
- Magnehelic gauge monitors HEPA filter pressure to indicate when to replace filter Protocol 3â„¢ control with large LCD display, integrated data logging capabilities and USB port for simple oven set-up and data export.
- Silicone-free construction
- End of cycle, high-limit audible and visual alarms
- Programmable, electronic door lock
- Installation and burn-off of HEPA filter including post-burn off cleaning of the chamber
- Cleaning and triple bagging in clean room before shipment
- Port 1″ (2.5cm) with tri-clamp fitting in center rear of oven
- The removable cold trap is an easy-to-clean condensate trap that prevents polyimide buildup in the oven’s exhaust
Your reliable partner for thermal processing.
Innovative Solutions for Precision Thermal Processing.
As a global leader in advanced thermal processing, ITW EAE Despatch is renowned for its innovative and reliable thermal solutions. With over 100 years of expertise, Despatch specialises in state-of-the-art industrial ovens designed to meet the demanding requirements of modern manufacturing. Their precision-engineered ovens deliver superior performance, energy efficiency, and consistent, uniform heating, making them an ideal choice for a wide range of curing, drying, and thermal testing applications.
