EPS SC-740 Stencil Cleaning System. Ideal for cleaning adhesive or solder paste stencils
|
|
Search Systems
EPS | Stencil Cleaner
SC-740
Stencil cleaning system
Is this system right for you?
Let our expert team guide you in choosing the perfect system for your needs.
Two models available
- Single Tank (ST) – Single tank for cleaning liquid
- Double tank (DT) – Dual tanks for separate cleaning and rinsing liquids
Ideal for cleaning adhesive or solder paste stencils
Typical applications for double tank machine
Metal Stencil Cleaning
Pump Print Stencil Cleaning
Misprint Cleaning
PCBA Defluxing
Squeegee Cleaning
Screen Cleaning
Maintenance Part Cleaning
- Simple to use machine with Android based interactive user interface
- Versatile machine with closed loop systems for cleaning, rinsing (optional) and drying
- Separate spray pumps and filtration systems
- Vertical elevator mechanism mounted with synchronous Spray Arms and Air Knives
- Linear fluid delivery technology
- Low pressure spray nozzles with <1 bar for cleaning of sensitive screens and stencils
- Vertical elevator mechanism with adjustable stroke
- Simple cleaning, rinsing and drying process with user programmed parameters
Elevate your production with EPS cleaning systems.
Features
Air Knife
- Air knife fitted on each arm.
- Drying percentage and time is programmable.
- Air knives are fitted with heating elements and high velocity blowers with air filters.
Filters
- Two sequential 20um and 5um large diameter BB filters used for cleaning circuit.
- If cleaning filters become blocked, a filter jam alarm is displayed on the HMI.
- Additional 5um large diameter BB filter on rinsing circuit of dual tank system.
Draining Valve
- Drain Valve is present on each tank to drain all used liquids.
Complete Stainless Steel chamber and pipework
- Chamber, fluid tanks, spray arms and piping in the machine is fabricated in Stainless Steel.
Easy to handle Door with lock
- Simple mechanical open and close mechanism.
- Mandatory interlocked protection mechanism used.
- If door is opened whilst machine is running, system stops immediately.
Cleaning and rinsing liquid pumps
- Used to pump fluid from tank and spray through nozzles for cleaning or rinsing process.
- Separate pumps are used for two tank machine for cleaning and rinsing processes.
- Magnetically coupled pumps.
Liquid Level Indicator
- Liquid level indicators show current level of the liquid present in each tank.
- If current level is below or above acceptance level, an alarm is given on the HMI as well as on light tower.
- Machine will not start if liquid level is not within acceptable range.
HMI Facilities
- Easy to add and modify any program.
- Storage up to 99 Programs.
- Weekly Timer facility.
- Password Protected setup and programs.
- SPC fault monitoring and reporting facility.
- Manual mode for testing inputs and outputs along with status.
Specifications
| SPECIFICATION | SINGLE TANK (ST) | DOUBLE TANK (DT) |
| Length (L-R) | 950mm | 950mm |
| Depth (F-B) | 1250mm | 1250mm |
| Height | 1850mm | 1850 |
| Frame Dimension | 740 x 740mm (29 x 29") max | 740 x 740mm (29 x 29") max |
| Controller | 10" Touchscreen with PLC | 10" Touchscreen with PLC |
| Dry Weight | Approx. 350kg | Approx. 350kg |
| Voltage Supply | 400V 3-Ø (3NPE) 50Hz | 400V 3-Ø (3NPE) 50Hz |
| CLEANING UNIT | ||
| Wash Tank Volume | 65 Litres | 65 Litres |
| Pump | Magnetically Coupled Centrifugal | Magnetically Coupled Centrifugal |
| Filters | 20 Micron & 5 Micron 10"LD | 20 Micron & 5 Micron 10"LD |
| Heater | 1 x 3kW Max. 60°C | 1 x 3kW Max. 60°C |
| Nozzle Pressure | Approx. 0.9 Bar | Approx. 0.9 Bar |
| Typical Cycle Time | 3 to 6 Minutes | 3 to 6 Minutes |
| RINSING UNIT | ||
| Rinse Tank Volume | 32 Litres | |
| Pump | Magnetically Coupled Centrifugal |
|
| Filters | 5 Micron 10"LD | |
| Nozzle Pressure | Approx. 0.55 Bar | |
| Typical Cycle Time | 2 Minutes | |
| Drying Unit | ||
| Centrifugal Blower with Air Knife | x 2 | x 2 |
| Heater | 2 x 1.5kW Max. 85°C | 2 x 1.5kW Max. 85°C |
| Typical Cycle Time | 6 to 12 Minutes | 6 to 12 Minutes |
A leader in manufacturing revolutionary machines.
EPS began in 1987 as an idea to produce cost-effective production machines for the electronics industry. Today, 36 years after inception, EPS have become a leader in manufacturing revolutionary machines, used across the globe by reputed companies.
Years of rich experience in the field have enabled EPS to handle complex parameters in their microcontroller and computer-controlled systems. Credit to their strong and committed R&D team, they are capable of producing hi-tech systems that are industry 4.0 ready.
They have a 40,000 sq.ft. manufacturing plant at Pune, India, provisioned with cutting edge equipment. Their R&D and manufacturing teams are ready to develop Industry 4.0 enabled, cost-effective & superb quality production machines for you.
