The GSR2280 is a dual workstation standalone router and is known as the world’s fastest router with a cycle rate of only 0.3 seconds per tab.
It can accommodate larger PCBs with paximum panel size of 550mm x 585mm (21.5” x 23”).
Equipped with Getech’s new Graphical User Interface, “Move, Teach & Cut”, the GSR has a user-friendly visual programming experience for rapid and accurate machine control.
Description
The GSR2280 is a standalone router machine specially designed to route (depanelize) large panels with PCB sizes of 550mm x 585mm into individual units. It is capable of speeds of up to 100mm/s and positioning speeds of 1000mm/s. It has two worktables that allow continuous routing with no stoppages during panel loading and unloading. The superior servo axis system provides a high acceleration/deceleration, reducing cycle time (increase in production output) and at the same time maintaining high accuracy cutting.
Using a high-resolution CCD camera and GSR user-friendly Windows-based software allows users to program the routing paths in minutes. There are also no limitations in the number of programs stored. GSR2280 uses high-quality components and a welded steel structure to ensure rigidity and high performance. All the axes and linear guides used are protected from dust and dirt to increase lifespan and performance.
| GSR2280 Semi-Auto Router Specifications | ||
| Routing Capability | Non-Routing Speed | 1000 mm/sec |
| Routing Speed | 100 mm/sec max (depending on material, cutting quality & tool diameter) | |
| Repeatability | Typical ±0.1 mm for straight lines, curves, et al. Under controlled condition ±0.05 mm | |
| Manipulator | Configuration | X, Y, W & Z axis |
| Manipulator Motors | AC brushless servo motors | |
| Manipulator Repeatability | ±0.02 mm | |
| Resolution | ±0.01 mm | |
| Workstation | Design | Dual workstation with dedicated pin fixtures, Manual panel Loading/unloading |
| Panel Positioning | Located by tooling holes or edges of PCB | |
| Panel Size | L550 mm x W585 mm | |
| Panel Clamping | Hinged Top clamp with gas spring assist | |
| Panel Thickness | 0.4 mm – 8.0 mm | |
| Component Height | Top max. 12 mm, Bottom max. 25 mm (Standard) / 50 mm (Option) | |
| Panel Access | Automatic Sliding door | |
| Spindle System | Spindle Motor | 0.5 kW (60,000 rpm) spindle with ESD / Ceramic bearings |
| Options | 0.42 kW (100,000 rpm) | |
| Tool Change | Manual tool change | |
| Cooling | Ambient cooled | |
| Router bit | Shank size 3.175 mm (1/8") | |
| Dust Filtration System | Power | 2 x 3.0 kW rotary vane vacuum blower |
| Filtration | 3 stage filtrations with disposable filter bag (10 microns) | |
| Vacuum Location | Top vacuum on spindle | |
| Extraction Hose (x2) | ID 51 mm (2”), L= 4M | |
| Noise Level | <78 dB | |
| Programming | System Platform | Windows ® based Industrial PC (Win 10) |
| Product Setup | Vision assisted point to point manual teaching; Vision assisted editing function; Test-run mode |
|
| Variable Functions | Tool bit diameter compensation, Filter change interval (distance) setting, Tool bit wear compensation. Other options are available. |
|
| Options | Barcode support (1D or 2D), Fiducial alignment | |
| Operation Monitor | Router Bit | Tool life tracking, Tool breakage detection, Routed board count |
| Vacuum | Vacuum filter change alarm | |
| Machine | Machine error history | |
| Maintenance | Router Bit | 100 to 300 M cutting distance before next tool change (depending on PCB) |
| Filter Bag | 1000 to 1500 M before next filter bag change | |
| Cleaning hose | Extra hose for periodic internal cleaning included | |
| Safety Features | E-stops, Spindle stop, Spindle motor overheat & Servo overload detection, Enclosed work area w/ safety doors | |
| Dimensions & Utilities | Machine Size (W x D x H) | 1620 mm x 1670 mm x 1700 mm |
| Vacuum Tank Size (Ø x H) | 2 x 400 mm x 800 mm | |
| Weight (Main + 2 Tanks) | Approx. 1170kg + 50Kg | |
| Power Supply | 3+N+E, 380~415V, 50 Hz or 3+E, 208~240V, 60 Hz; 10kW | |
| Air Supply | 6 bars | |
Getech Automation is a leading provider of advanced automation solutions tailored for the electronics manufacturing industry. Renowned for its innovative PCB depaneling and handling systems, Getech delivers exceptional quality and reliability across its product range, including inline routers, laser depaneling machines, and custom automation solutions. With a commitment to enhancing production efficiency and precision, Getech’s systems are designed to optimize the manufacturing process, reduce downtime, and improve overall product quality. Trusted by industry leaders, Getech continues to push the boundaries of automation technology, offering scalable solutions that cater to the evolving demands of modern electronics production.
Register now and receive the latest news on product releases, special promotions and equipment updates.
Etek Europe Ltd is a company incorporated in Scotland (Registered Number SC317060).
Registered Office at Etek Technology Centre, Dow Road, Prestwick Aerospace Park,
Monkton, Prestwick, Ayrshire, United Kingdom, KA9 2TU.
The products on this website are for guidance only and are subject to change in accordance with the manufacturers. We reserve the right to make these changes without prior notice or liability.
© Copyright 2025, Etek Europe Ltd. All Rights Reserved.
