Menu

AD-305

Mekko Technologies cabinets are used in a wide variety of applications involving moisture removal and dry storage. The main industry sector installing Mekko's dry storage cabinets and drying cabinets is the electronics assembly industry, where components and substrates must be protected from the damaging effects of moisture.

Allows compliance with IPC/JEDEC J-STD-033, which details recommendations for handling, packing, shipping and use of moisture/reflow sensitive surface mount devices.

If moisture is absorbed from the environment by surface mounted components, and then the components are exposed to high temperatures, as in solder reflow ovens(convection, infrared, IR/convection, vapour phase, hot air rework tools), then the absorbed moisture will expand rapidly, causing internal device stress. The resulting stress can cause internal or external cracking, delamination, and internal corrosion.

Eliminate "popcorning" and micro-cracking of ICs and BGAs during reflow by using Active Desiccant component drying and storage, rather than baking.

Drying out the components resets the "floor life" clock.

Maximum 30 removable sliding shelves
5 doors, 3 one side, 2 opposite side
Capacity ca. 750 litre
Dim: 1770(H) x 700(W) x 750(D)

To learn more about the AD-305 and its highlights, simply download our datasheet below.

Contact our Product Support Specialist

Our sales and technical team are on hand to support any questions you may have.